On the overall carbide in the tool saw blade cutter in the dry cutting, as long as it does not affect the milling cutter milling depth, if a larger radial runout or axial jump can cause damage, the overall carbide saw blade cutter Thinner, the more sensitive to vibration and tensile stress when used, so the milling machine should be in the best condition to run, that is, high precision machine, good rigidity, smooth transmission, each tooth into the constant, full cooling.

The overall carbide saw blade has many advantages, but because the cemented carbide itself is less tough than the high-speed steel, so when the cutting process is improper or improper machining accuracy is easy to chipping. So there is a question of how to use it properly.

The accuracy of the milling cutter mounted on the arbor should generally meet the radial runout. As far as possible with a large flange on both sides of the blade clamped on the pole. The purpose is to eliminate vibration to avoid lateral compression. Should choose a reasonable milling line speed: generally under the same conditions, the overall carbide saw blade cutter can choose faster than the high-speed saw blade cutter Vc, but the amount of each tooth should be lower than the amount of high-speed steel , The specific value should be determined by the user according to the speed of the milling machine, the nature of the milling material, the outer diameter of the milling cutter, the thickness, the number of teeth, the milling depth and so on.

With the development of technology innovation, carbide saw blade cutter is constantly updated, and has good performance. In addition, during dry cutting, the internal cooling airflow can reduce the fouling of the chip and prevent the chip from being re-cut, thereby removing the factors that are detrimental to post-processing and reducing the durability of the saw blade, reducing the scrap Rubbing, to ensure the quality of surface processing.