Cutter during use FAQs[2015/2/4]

1. Overcutting Reduce the depth and the width of the cutting 2. Machinery or fixtures lack of accuracy Repair of mach......

Commonly used materials produced cutter[2015/2/4]

1) High-speed tool steel (referred to high-speed steel, front steel, etc.), sub-general and special high-speed steel two......

Carbide Applications[2015/1/28]

What carbide can be used to make? Carbide cutting tools with carbide undoubtedly raw material for processing, then the ......

Deep hole drilling cutter selection problem[2015/1/21]

First, deep hole drilling cutter material selection attention problems Tooth material should be based on each tooth loa......

Deep Hole Drilling Instructions[2015/1/7]

Deep hole drilling deep hole drills specifically for machining. In the machining of the hole depth and usually the ratio......

Steps for machining high precision drilling[2014/12/31]

High precision diamond machining steps, according to different processing conditions can be surface coating to extend to......

Use the drill with internal cooling[2014/12/24]

Drill holes with internal cooling to reduce heat during processing speed drill to drill and bring the appearance of dama......

Drill installation and removal[2014/12/17]

The following drill installation method is applicable to a variety of demolition drill rig installation and removal, dis......

Carbide cutting tool material selection[2014/12/10]

As one of the super-hard carbide cutting tools, widely used in the production processing and manufacturing, is a powerfu......

Cutter cutting requirements for materials[2014/12/3]

First, the cutter common materials 1) High-speed tool steel (referred to high-speed steel, front steel, etc.), sub-gene......

teach you how to buy tap[2014/11/26]

Taps as a working tool in the thread, is the most important tool for manufacturing operator threading. Now tap tool bran......

Drill Category[2014/11/19]

Drill bit according to their different material, structure, purpose, etc., can be divided into the following, come toget......